Do you own room that could benefit from a ceiling fan Setting up a ceiling fan is as easy as changing your current light fixture. Every single piece of the cabling will already be around, so the only challenge will be replacing the old workbox with one that is approved for the weight of a ceiling fan. Hanging your all new ceiling fan on an pre-existing box that won't support the added weight of the fan could result in disaster. Right before you carry out anything, read the guidelines for your fan very cautiously and make sure that you have the needed tools.

If you're going to setup the fan on a cathedral type ceiling, then you may need to have parts to boost the fan lower. Given that you are prepared for the actual installation, make sure that the breaker is put off, so no power is delivering to the light you are changing. After taking off the current light fixture, verify to see if the installed workbox can tackle the weight of your ceiling fan. Nearly all workboxes are not made for ceiling fans, you will need additional support. Adding support to the workbox is not that tough if you have access to the light fixture from the attic.

To increase support, you merely nail a 2x4 in between the ceiling rafters so it touches the top of the workbox. As soon as the 2x4 is properly anchored, prop the workbox to the 2x4. If you complete it properly, the fan should be properly supported by the 2x4. If you are not able to do it from the attic or you have basically no attic, you will need to create a cross bracing in your ceiling. It is more hard to do and may not be that secure but its the ideal option if you have no attic admission.

When you have placed the fan together in accordance with the instructions, you are ready to install the fan to your light fixture. The issue is to hold onto the fan while attaching the wiring woodworking blueprints. The problem is according to the form of fan you acquire, whether it is a hanging frame or a fan that has a bracket with a J hook. For the majority of fans the wall switch will turn the device on or off, and the chain will control the speeds. If you select to also deploy a light kit with the fan, both can be regulated by either chain or wall switch.

Following, just adhere to the wiring directions, usually as easy as connecting the two black wires, both the white wires, as well as the two ground wires. Now all you need to do is accomplish assembling the fan according to the guidelines, by attaching the fan blades. As soon as that is carried out, turn the breaker back on to find out the results.